Stokta yok Eleaf Pico Melo lll Mini Atomizer

Eleaf Pico Atomizer - Melo lll Mini


Melo III Mini Atomizer


The Melo III Mini Atomizer offers you the Mini Atomizers of Eleaf, a brand that electronic cigarettes love. The Melo III Mini Atomizer is made entirely of stainless steel, just like the larger Melo III Atomizer. In fact, Melo III Mini Atomizer and Melo III Atomizer only distinguish between tank capacity and tank capacity and atomizer size. The Melo III Mini Atomizer is made entirely of stainless steel. The Melo III Mini Atomizer has a slightly smaller paint than the larger version of the Melo III Tank. The Melo III Mini Atomizer has a 2 ml tank. Melo III Mini Atomizer; It is made entirely of stainless steel, from the drip tip to the atomizer headrest. With the 510 screwing system, this wonderful atomizer, usually used with mod electronic cigarettes, can give high steam through air ducts. The Melo III Mini Atomizer has a 55 mm paint. This wonderful atomizer of 22 mm is made of high quality glass tanks. If you are looking for a high-quality atomizer made entirely of stainless steel on top of the standards you are looking for, you can choose Melo III Mini Atomizer with peace of mind. The Melo III Mini Atomizer is a robust and high quality atomizer tank made entirely of stainless steel, such as the larger Melo III Atomizer.


Melo III Mini Atomizer Box Content


Melo III Mini Atomizer Enclosure;

  • 1 piece Melo III Mini Atomizer
  • 1 EC 0.3 Ohm Atomizer Head
  • 1 EC 0.5 Ohm Atomizer Head
  • 4 Seal Ring
  • There are 1 user manual.



Melo III Mini Atomizer Features:


  • Melo III Mini Atomizer; It is manufactured from stainless steel completely from the mouthpiece (drip type) part to the atomizer socket.
  • Melo III Mini Atomizer has a tank which is produced from 2 ml quality glass material.
  • Invisible air ducts are found just below the tank of the Melo III Mini Atomizer. Through these air ducts, Atomizer Tank can reach high capacity.
  • Uses the EC Atomizer produced by Melo III Mini Atomizer Eleaf.
  • Melo III Mini Atomizer 510 is Mounted to Electronic Cigarette Body with Screwing System.
  • The Melo III Mini Atomizer has a 22 mm Anchor, 55 mm Paint.
  • Melo III Mini Atomizer Has a Tank Cover from Stainless Steel. You must open this lid to fill the tank liquid. Tank lid is also produced completely from Stainless Steel.


Melo III Mini Atomizer Dimensions:


Height: 55 mm

Diameter: 22 mm

Material: Stainless Steel

Screwing System: 510 Screwing System


How should Melo III Mini Atomizer be used?


The Melo III Mini Atomizer has a 2 ml liquid tank. This liquid tank is filled after opening the tank lid made of stainless steel. You can fill up the tank cover of the Melo III Mini Atomizer. You should be careful when filling this atomizer with its own liquid tank of liquid, and be careful that the air vents are closed. If you fill the Melo III Mini Atomizer tank more than 90%, you will cause liquid leakage from the atomizer. If there is less than 10% liquid in the tank in the same way, if you activate your electronic cigarette, you will cause the atomizer to wear out and burn in a short time. Burning the atomizer will not only cause your mouth to taste bad, but it will also cause the steam to smell badly, and if you do it, there will be a risk to your health. Do not forget to change the atomizer coil headings periodically. This is true not only for the Melo III Mini Atomizer, but for almost all electronic cigarettes.


The Melo III Mini Atomizer uses the EC Atomizer Coil Cap. As the ohm level drops, the steam density increases. EC shows that Atomizers are produced by Eleaf.

Product Features
Screw Connection 510

Bu ürün ilgili sorular henüz yok.

Soru Sorun

Note: HTML is not translated!

Write a review

Note: HTML is not translated!
    Bad           Good

Eleaf Pico Melo lll Mini Atomizer

  • Product Code: eleaf-melo-3-mini
  • Availability: Stokta yok
  • 160,00TL

Tags: eleaf, melo, atomizer, atomizer-tank

Loading...